Lineagepower開關電源CP2000AC54PE--圣馬電源專業代理進口電源
如果您對該產品感興趣的話,可以
產品名稱: Lineagepower開關電源CP2000AC54PE--圣馬電源專業代理進口電源
產品型號: CP2000AC54PE
產品展商: 其他品牌
簡單介紹
38.5
Lineagepower開關電源CP2000AC54PE--圣馬電源專業代理進口電源
的詳細介紹
Features
• Compact 1-RU form factor providing 20 W/in3
• Constant power from 52 – 58 Vdc
• 2000W from nominal 200 – 240 Vac
• 1200W from nominal 100 – 120 Vac
• Output voltage programmable from 44V – 58 Vdc;
output defaulted to 54V
• PMBus compliant dual I2C and RS485 serial bus
communications
• Power factor correction (meets EN/IEC 61000-3-2
and EN 60555-2 requirements)
• Tested to IEEE802.3af Compliance, 2250 output***
isolation to chassis/signals for POE applications.
(see ordering info)
• DC Output over-voltage and over-current
protection
• AC Input over-voltage and under-voltage protection
• Over-temperature warning and protection
• Redundant, parallel operation with active load
sharing and redundant +5V Aux power
• Remote ON/OFF
• Hot insertion/removal (hot plug)
• Four front panel LED indicators
• UL* 60950 Recognized, cUL to CSA† C22.2 No.
60950-00 Certified, VDE‡0805 Licensed
IEC60950, 3rd edition)
• CE mark meets 73/23/EEC and 93/68/EEC
directives§
• Internal variable-speed fan control
The CP2000AC54 Front-End Power Supplies in the Compact Power Line platform are specifically
designed to operate as an integral part of a complete distributed power system. The high-density, front-toback
airflow rectifier is designed for minimal space utilization and is highly expandable for future growth. It
is provided with many features including PoE isolation, RS485 and dual-redundant I2C communications
busses that allow it to be used in a broad range of applications. The flexible feature set makes this frontend
power supply an excellent choice for applications requiring modular ac-to-dc bulk intermediate
voltages, such as in distributed power.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All the required procedures for CE marking of end-user
equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
*** For PoE applications, order the CP2000AC54PE, which is 100% factory hipot-tested per IEEE802.3af.
